low viscous, high strength, temperature resistant, for bonding of rubber, EPDM, viton, metals/synthetic materials | |
Strength class: | high strength |
Curing system: | humidity |
Viscosity: | 100 |
Chemical type: | ethyl-cyanoacrylate |
Final Strength: | 20 hours |
Fixture Time: | 5 - 10 seconds |
Appearance: | ![]() |
BEST-CA 221 is a one-component, solvent free cyanoacrylate adhesive based on ethyl-cyanoacrylate.
BEST-CA 212 is the standard product for bonding of plastics, e.g. polyamide, PVC, PMMA and various elastomeres, e.g. rubber, EPDM and viton amongst each other and with metals and wood.
BEST-CA 221 is very fast cure. After full cure the adhesive is high strength and temperature resistant.
BEST-CA 221 is ready-to-use and can be applied from the original container.
BEST-CA 221 is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within 5 to 10 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure.
Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.
CHEMICAL AND ENVIRONMENTAL RESISTANCE
BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.
product inquiry for a sample to CA 221
Only for commercial customers and for serial production.
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.
Only for commercial customers and for serial production.
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.
Safety data sheet only available via email
Klicken Sie auf den unteren Button, um den Inhalt von zu laden.