Best-Primer K

for the pre-treatment of glass, synthetic materials and ceramics before bonding with BEST-KL adhesives
Chemical type:	aliphatic hydrocarbon with several active agents
Appearance:

Data Sheets:

TECHNICAL INFORMATION

BEST-Primer K is a solvent containing primer for the pretreatment of glass, synthetic materials and ceramics before bonding with a BEST-KL adhesives (UVA-light curing adhesive based on epoxy resin). BEST-Primer K consists of 99% CFC/FC freed carrier agent and the actual pretreatment agent.

DIRECTIONS FOR USE
BEST-Primer K is an adhesion primer to be used in combination with all BEST-KL adhesives. It is suitable for the pretreatment of bonding surfaces made of glass, synthetic materials or ceramics. Pretreatment with BEST-Primer K enhances strength, temperature and chemical resistance of the bonding. Values may vary and depend on the material to be bonded, the bonding gap and other conditions of the application. We recommend performance tests prior to use.

INSTRUCTIONS FOR USE
Apply BEST-Primer K on the bonding surface (brush, spray or dip). Allow product to dry off completely (5 – 10 minutes) before application of adhesive and assembly. Bonding process has to be completed within 24 hours after application of BEST-Primer K.

CURING
Fixture time of all BEST-KL adhesives is reached within 20 – 60 seconds after exposure of appropriate wave length and intensity.

STORAGE
Store in a cool, well ventilated place. Keep container tightly closed. Shelf life in unopened original container: 12 months (room temperature)